THE GALLERY


|click here for full size .jpg|

The Flying Flea was designed in 1934 by Henri Mignet. It features an 18 ft. pivoting front wing and 13 ft. fixed, tandem rear wing, and two-axis controls. It was originally powered by low horsepower motorcycle and auto engines. Modern Fleas can utilize a variety of engines
including Rotax, Citroen, DAF, etc.

Flying Flea HM-14

Wing Span........18.00 ft.
Wing Area.......100 sq/ft.
Length................13.50 ft.
Max Gross Wt...500 lbs.
Empty Wt..............260 lbs.
Fuel Capacity.....6.2 gal
Seat..............................1
Cabin Width........19.5in.
Range.................180 sm
Takeoff Dist..........150 ft.
Landing Dist.........150 ft.
Vmax..................70 mph
Vcr......................55 mph
Vst......................25 mph
Landing..............25 mph
Climb Rate(msl)..500 fpm

Std. Engine/HP
Various/35 hp

Plans
$65.00*

Usable HP
Range
25-45

Kit
NO

* US$75 Canada
* US$80 Overseas

Construction
Mtrl.
Wood, Fabric

Info Packet
YES

Est. Bldg.
time
300 hrs.

2 hr Video
$45.00


|click here for full size .jpg|

Based on Henri Mignet's favorite HM-16 "Baby Pou." this is at US ultralight weight. The HM-16 was designed and built after the lessons he learned with the original HM-14 "Flying Flea." Plans include trigear version, trailering configuration, weight and balance manual, and more.

NOTE: There has been some controversy over these plans in recent times. We therefore present them for informational purposes only

Flying Flea HM-160/1/2

Wing Span...........15.00 ft.
Wing Area.............77sq/ft.
Length...................10.50 ft.
Max Gross Wt......472 lbs.
Empty Wt..............242 lbs.
Fuel Capacity........6.2 gal.
Seat..................................1
Cabin Width...........19.5 in.
Takeoff Dist......100 ft.
Landing Dist.....150 ft.
Vmax..............80 mph
Vcr..................65 mph
Vs1..................20 mph
Landing..........20 mph
Climb Rate @msl..500 fpm

Std. Engine/HP
Various/25 hp

Plans
$125.00*

Usable HP Range
20-35

Kit
NO

Construction Mtrl.
Wood, Fabric

Info Packet
$5.00

Est. Bldg. time
400 hrs.

Video
No

*US$135.00Canada
*US$150.00Overseas


|click here for full size .jpg|

Flying Flea HM-16

In flight

Although the earliest version of the Flying Flea, 60 years ago, had problems leading to nearly a dozen crashes, wind tunnel tests by British and French authorities solved these problems. Since 1936 the Flying Flea has flown in large numbers in Countries around the world with an exemplary accident-free record. In the U.S., the popularity of the design is slowly growing to match the popularity found in Europe.

ALSO AVAILABLE: HM-160 series MODEL AIRPLANE PLANS

Taken from the full-size plans above, 12 sheets 11" x 17" plus one 8-1/2" x 11" including three views plus fuselage details, wing ribs, spars, dimensions, full specs and adjustments for balance.

US$20.00 postpaid US & Canada (US$30.00 Overseas)

Flying Flea HM-290/1FB

Based on Rodolph Grunberg's version of the HM-293, this was designed, built and flown in Australia by Fred Byron. Plans include tail dragger and trigear version, folding wings, Cosandey Flap, and more.


|click here for full size .jpg|
Wing Span...........20.00 ft.
Wing Area.............120sq/ft.
Length...................11.50 ft.
Max Gross Wt......580 lbs.
Empty Wt..............360 lbs.
Fuel Capacity........10 gal.
Seat..................................1
Range................N/A sm
Takeoff Dist......150 ft.
Landing Dist.....120 ft.
Vmax..............85 mph
Vcr..................70-75 mph
Vs1..................26 mph
Climb Rate @msl..1000 fpm

Std. Engine used
Rotax 503

Plans
$85.00*

Usable HP Range
30-70

Kit
NO

Construction Mtrl.
Wood, Fabric

Info Packet
$5.00

Est. Bldg. time
800 hrs.

2 hr Video
$45.00

*US$90.00Canada
*US$100.00Overseas

FLYING FLEA BOOKS! FLYING FLEA BOOKS! FLYING FLEA BOOKS! FLYING FLEA BOOKS! FLYING FLEA BOOKS!